• Made from 1" polyethylene gas pipe. We use this because of its excellent durability and ability to hold its shape.

• The insert nuts in our hoop go all the way through to both sides of the hoop, increasing the strength of the wick attachment point. No more broken Jack nuts!!

• Our wicks and spines are attached to polyurethane rubber stems that flex when they hit the ground to prevent breakage. While flexible, these polyurethane stems are rigid enough to prevent the wicks from wobbling and will hold the weight of the hoop when stood upon. The polyurethane also acts as a lock when tightened against the hoop to reduce the likelihood of wicks coming loose during use.

• Spines are available in 3 lengths: 6.5" (165mm), 8.5" (216mm) and 10.5" (267mm) long. Short Spines are great for fast tricks which require getting the hoop close to the ground, however will be very hot if you don't keep moving. Longer spines get the fire further away from your hands and body to reduce the heat you feel. Keep in mind the longer the spines, the less ground clearance you have.

• Wick heads are available in 2 sizes: Regular and Large. The regular wicks are 1.5" (38mm) wide and 1.5" (38mm) diameter and the larger wicks are 1.5" (38mm) wide and 2" (50mm) in diameter.

• Choice of 6 accent colors (Neon Green, Hot Pink, Neon Yellow, Neon Orange, Blue, Red, and Purple)

• A strip of matching colored gaffers tape runs along the inside perimeter of the hoop for extra grip.

• Our Hoop is available in 2 sizes: 40" (1016mm) diameter and 44"(1118mm) diameter

• A Philips screw driver is required for assembly. We send the hoops coiled up so we can ship them anywhere in the world without extra shipping charges.

• Replacement spines are available, and are interchangeable with almost any manufacturer’s hoops on the market!